A 'by appointment only' high-end audio dealership in Cleveland Ohio.

2888 Weybridge Road Shaker Heights OH 44120
PH: (216) 375-1393 • FAX: (216) 751-5001 • EMAIL:
Hours: 2:00 - 9:00 Tuesdays, 10:00 - 6:00 Saturdays. All other days by appointment only.

Integrated Amps

Acoustic Plan Sitar

Sitar from Acoustic Plan is a hybrid integrated amplifier that joins together the essential merits of the pre- and power amplifier into one compact component. Many years of experience in developing amplifiers contribute to the excellent sound quality. No expense was spared on this integrated amplifier; for example, the casing - like those of pre- and power amplifiers - consists of single precision-engineered aluminium plates. Critical components such as the potentiometer and rotary switches are composed of top quality materials. This development was carried out without any output relays.

Leben Hi-Fi CS-300X "Limited" Integrated Amplifier

SMALL AND POWERFUL TUBE EL84 (MADE BY "SOVTEK" / RUSSIA) CS-300X(S) is equipped with SOVTEK Tube EL-84 which has been welknown by audiophiles for its high sound quality against its small size. A high input sensitivity of EL84 does not require a complicated circuit and accordingly, it can create a low distortion output signal. CS-300X(S) picture No.2 HIGHEST-END AUDIO GRADE COMPONENTS RESISTORS: Precision Industrial Grade +/-1% FIRST-STAGE BY-PASS CONDENSOR: An ultimate audio condensor "OS Condensor" developped by "SANYO" LAST-STAGE BY-PASS CONDENSOR: "Fine-Gold" by "NICHICON" JOINT CONDENSOR: "Metalized Polypropylene Condensor" with "Mesh-Shielding". NF OVERSHOOT PREVENTION CONDENSOR: Ceramic Conderser. CATHODE RESISTOR: 4W type.(Instead of 3W type) OUTPUT TRANSFORMER: Newly developped Transformer with wider range for high frequency. WBT type binding post.(From April/05 delivery onward)/li

Leben Hi-Fi CS-600 Integrated Amplifier

Offering a wide-ranged and flat frequency response upto 100KHz prepares the amplifier for future digital audio formats and current ones like SACD .

Line Magnetic 217-IA

Just arrived, the LM 217-IA is a 8 watt SET integrated amp based on the 300B tube. Absolutely stunning performance! Priced at $2995.00 this amp is an ideal match for the new Solo loudspeaker or, any other high efficiency speaker.

Line Magnetic 219-IA

The LINE Magnetic 219-IA has arrived. LM Audio 219IA 845 SET integrated Amplifier. 24 watt Single Ended Class A. 300B driver tubes, 310A input tubes. Adjustable bias via built in meters. Remote controlled. 4,8 and 16 ohm taps. Negative feedback adjustable and defeatable. Pre-amp input. Power output via meters. Two power transformers for true dual mono operation. Point to point wired throughout. Comes with a tube cage.

LM 218-IA

LM 218IA LM 218IA 22 watt per channel 845 SET. Driver tubes can be switched to adjust flavor. The options are 6V6, 6L6, 6550, EL34, KT88, 5881 etc. Remote control, adjustable bias using built in meter. 4, 8 and 16 ohm output taps. All point to point wiring used throughout. Comes with a tube cage.

LM 518-IA integrated amp

The wonderful 518-IA from Line Magnetic is one of my favorite integrated amps. it received a great review in the October 2015 Stereophile issue. Tube complement: 845 x2, 6L6 x2, 5AR4 x1, 12AX7 x2 Output power: 22W + 22W Distortion: 1% (1kHz) S/N: 87dB Input Impedance: 100k Output impedance: 4, 8, 16ohms

LM Audio 210IA

LM Audio 210IA 300B SET integrated amplifier. 8 watts single ended. Remote controlled. Bias adjustable with built in meter. Power output meter. Negative feedback switchable. Point to point wiring used throughout. 4, 8 and 16 ohm output taps. Negative feedback adjustable and defeatable. Comes with a tube cage

LM Audio LM 211IA EL34

LM 211IA EL34 push pull integrated amplifier. Ultra linear and triode switchable. 15 watts per channel in triode, 32 watts per channel in ultra linear. Remote controlled, adjustable bias with built in meter. 4, 8 and 16 ohm output taps. All point to point wiring used throughout. Comes with a a tube cage.

LM Audio LM 216IA

The 216IA KT88 push pull integrated amplifier. Ultra linear and triode switchable. 22 watts per channel in triode, 38 watts per channel in ultra linear. Remote controlled. Bias adjustable with built in meter. 4, 8 and 16 ohm output taps. Point to point wiring used throughout. Comes with a tube cage.

LM Audio Mini 218

Mini 218 EL84 Single ended integrated. Headphone output, one input. 3 watts single ended class A. Point to point wiring used throughout. 4 and 8 ohm output taps. Comes with a tube cage.

LM-501-IA

The LM 501-IA integrated amp has 100 watts per channel from the KT 120 power tubes. This is part of the new gold series. Some of it's features include dual power, bias meters on the front panel, 4 pairs of inputs, pre out, and  remote.

LM-508IA Integrated Amplifier

The LM 508-IA integrated amp has just arrived! This black beauty is a 48 watt per channel single ended 805 tube based amp. With this power you will be able to drive virtually any speaker. In stock for your auditioning pleasure.

Rega Ellicit-R

The Elicit-includes a high quality built in moving magnet phono stage designed to maximise the potential of your vinyl system. A simple switch on the rear panel allows the same input to be switched to a secondary set at line level. This input is specially configured to offer further isolation and reduce noise. This makes it ideally suited for connection of more sensitive products such as an external MM or MC phono stage. If your system is not vinyl based the same socket allows this line input to be used with any line level product (such as a CD player or DAC) ensuring maximised connectivity via the back panel. These features coupled with Polypropylene capacitors throughout the signal path, improved power supplies, increased output power to 100 watts per channel all housed in a brand new custom designed case combine to give the best performance Elicit to date.

Shindo Laboratories Apetite 6V6 Stereo Line Amplifier

Apetite 6V6 Stereo Line Amplifier from Shindo Laboratories is a limited edition push pull entry into the Shindo line that doesn't sacrifice the amazing qualities that only Shindo Laboratories is capable of. 15 watts per channel into 8 ohms.

Spec RSA-M3 EX Real-Sound Amplifer

This digital Integrated amp is absolutely amazing. You can read the review from Jeff Day's blog http://jeffsplace.me/wordpress/?p=7293. The amp has 60 watts per channel into 8 ohms and doubles into 4 ohms. Also it can be used as a independent power amp.

Sugden A21-SE

I am really excited about this piece. This is a 30 watt true class A integrated amplifier. It is "shockingly" musical and drives every speaker I have thrown at it. Made in England, and now available for audition. This piece is highly recommended!

VTL IT-85 Integrated Amplifier

The VTL IT-85 Integrated Amplifier is designed for those who seek the simplicity of a single chassis system, but with the performance of separates. Designed with a fully active preamplifier stage, the IT-85 delivers a hearty 60 watts per channel with the sonic characteristic that is similar to our well regarded ST-85 Stereo amplifier and the TL2.5 preamplifier combination – fast, musical 3-D sound, and solid bass support that VTL is known for. The IT-85 is a full linestage preamp and power amplifier in one chassis, and the linestage section has sufficient gain and a buffered output to be able to drive a subwoofer through the preamp out. The headphone section of the IT-85 is driven off the tube output stage and output transformer of the power amplifier section thus making it an ideal high performance pure tube headphone amplifier for headphone aficionados. The IT-85 is designed to accommodate future upgrade — when you are ready to add a subwoofer, separate pre- or power amplifier, surround processor or headphones to your system, the IT-85’s many different output stage configurations can be easily and painlessly re-configured, often with just the flip of a switch. Hand built in our factory in California with the proven VTL quality, the IT-85 will give you lasting value and listening pleasure for years to come.